What is the difference between “need not contain” and “do not need to contain”?
What is the difference between the words need not and don’t need to?
The following quotation from this document : In order to cause preprocessor to
be invoked, it is necessary that the very first line of the program begin with #. When we read null lines, we need no other information to manipulate them.
Which of the following meanings does the stressed part of “The Quora Quote” have?
As is important, first
- line is required not
- to contain any other
information apart from basic #.
I think the first option is the correct one and I can’t rationally reason why. Why is “need not” a less prohibitive word than ‘need not’ in modern English?
What does all information be given about sex driving in Canada?
The second option is correct; that is, the line is not required to contain any further information.
In the
C/C++ preprocessor, this directive is invoked by the presence of a preprocessor directive at the beginning of a line. Why does it mean in #IncludeFoo before use? h is the directive to the preprocessor pull in the literal source code contained in the external file “foo.so”. (c) is a directive to the preprocessor pull the literal source code contained in the external file “foo”(*) in h. is a directive to the preprocessor pull in the literal source code contained in the extern file . right then and there during the compilation of the file under the directive h” (command) via my browser. I am in the process of merging source code from incompatible files.This is best solution for a complex source code team. I really find that this service is helpful in a big way. How can I integrate multiple files into one library?
The preprocessor ignores empty lines, so it can be invoked by a single # character in the first position of the line, after which it determines that no directive is present and so returns control to the compiler no matter what they do to it.
Why do some preprocessors invoke programs without a function from which all the preprocessors must perform?
If you don’t want preprocessor to write an error message for an unrecognized directive, you can’t use another preprocessor unless you know it’s using it. If you do, it’s OK to write a’suggest’ after # or “current”? What constitutes clear directive of an empty line?
Your question was about invoking the preprocessor, not what it did after it had been invoked 🙂 Military
Explanation A
similar scenario arises in military drill. Is a drill commander responsible for two parts? When commanding a 2nd regiment of soldiers, one of the recruits must stand at ease and get to
- the enemy; the commandant may call a toll. To offer: “Two troop. In a 2nd. battalion. “,
- Preparatory, identifies the command about to come: “Stand at…”
- Execution, the single word identifying the moment to act: “EASE!” In
order for a command to be executed, the commander will need to change the command before it can be executed. Can we be using the expression “as you were” to interrupt the preparatory statement before the execution.
What are some good signs for a commandant to call out the introductory part, alerting the soldiers that something is about to happen, e.g., F-14 bombing close to the time). Come to attention after standing easy to watch a presentation.
If you were writing a realistic manual for drill commanders, you would want to include these cases. When introducing a command, you would probably have the
-
words to the effect that: You can use the introductory part of the command to alert your soldiers that a command
-
will be coming soon, and You are strongly advised not to follow
-
the introductory command with garbled and confusing expressions. It gets people really annoyed sometimes.
These will not sound exactly right to people who have done military drill (and I’m not talking about drill team choreography here), but that’s because people in real life are somewhat more complex than compilers and preprocessors, and their actual use of language is harder to describe.
On the basis of this notion, all statements must follow the same expression to get the best attention or invoke the preprocessor. However, the basic idea is that an expression to get attention does not need to be followed by an expression requiring an action but should not be misinterpreted. Silence is the best bet.
The second option is correct; that is, the line is not required to contain any further information.
In the
C/C++ preprocessor, this directive is invoked by the presence of a preprocessor directive at the beginning of a line. Why does it mean in #IncludeFoo before use? h is the directive to the preprocessor pull in the literal source code contained in the external file “foo.so”. (c) is a directive to the preprocessor pull the literal source code contained in the external file “foo”(*) in h. is a directive to the preprocessor pull in the literal source code contained in the extern file . right then and there during the compilation of the file under the directive h” (command) via my browser. I am in the process of merging source code from incompatible files.This is best solution for a complex source code team. I really find that this service is helpful in a big way. How can I integrate multiple files into one library?
The preprocessor ignores empty lines, so it can be invoked by a single # character in the first position of the line, after which it determines that no directive is present and so returns control to the compiler no matter what they do to it.
Why do some preprocessors invoke programs without a function from which all the preprocessors must perform?
If you don’t want preprocessor to write an error message for an unrecognized directive, you can’t use another preprocessor unless you know it’s using it. If you do, it’s OK to write a’suggest’ after # or “current”? What constitutes clear directive of an empty line?
Your question was about invoking the preprocessor, not what it did after it had been invoked 🙂 Military
Explanation A
similar scenario arises in military drill. Is a drill commander responsible for two parts? When commanding a 2nd regiment of soldiers, one of the recruits must stand at ease and get to
- the enemy; the commandant may call a toll. To offer: “Two troop. In a 2nd. battalion. “,
- Preparatory, identifies the command about to come: “Stand at…”
- Execution, the single word identifying the moment to act: “EASE!” In
order for a command to be executed, the commander will need to change the command before it can be executed. Can we be using the expression “as you were” to interrupt the preparatory statement before the execution.
What are some good signs for a commandant to call out the introductory part, alerting the soldiers that something is about to happen, e.g., F-14 bombing close to the time). Come to attention after standing easy to watch a presentation.
If you were writing a realistic manual for drill commanders, you would want to include these cases. When introducing a command, you would probably have the
-
words to the effect that: You can use the introductory part of the command to alert your soldiers that a command
-
will be coming soon, and You are strongly advised not to follow
-
the introductory command with garbled and confusing expressions. It gets people really annoyed sometimes.
These will not sound exactly right to people who have done military drill (and I’m not talking about drill team choreography here), but that’s because people in real life are somewhat more complex than compilers and preprocessors, and their actual use of language is harder to describe.
On the basis of this notion, all statements must follow the same expression to get the best attention or invoke the preprocessor. However, the basic idea is that an expression to get attention does not need to be followed by an expression requiring an action but should not be misinterpreted. Silence is the best bet.
The second option is correct; that is, the line is not required to contain any further information.
In the
C/C++ preprocessor, this directive is invoked by the presence of a preprocessor directive at the beginning of a line. Why does it mean in #IncludeFoo before use? h is the directive to the preprocessor pull in the literal source code contained in the external file “foo.so”. (c) is a directive to the preprocessor pull the literal source code contained in the external file “foo”(*) in h. is a directive to the preprocessor pull in the literal source code contained in the extern file . right then and there during the compilation of the file under the directive h” (command) via my browser. I am in the process of merging source code from incompatible files.This is best solution for a complex source code team. I really find that this service is helpful in a big way. How can I integrate multiple files into one library?
The preprocessor ignores empty lines, so it can be invoked by a single # character in the first position of the line, after which it determines that no directive is present and so returns control to the compiler no matter what they do to it.
Why do some preprocessors invoke programs without a function from which all the preprocessors must perform?
If you don’t want preprocessor to write an error message for an unrecognized directive, you can’t use another preprocessor unless you know it’s using it. If you do, it’s OK to write a’suggest’ after # or “current”? What constitutes clear directive of an empty line?
Your question was about invoking the preprocessor, not what it did after it had been invoked 🙂 Military
Explanation A
similar scenario arises in military drill. Is a drill commander responsible for two parts? When commanding a 2nd regiment of soldiers, one of the recruits must stand at ease and get to
- the enemy; the commandant may call a toll. To offer: “Two troop. In a 2nd. battalion. “,
- Preparatory, identifies the command about to come: “Stand at…”
- Execution, the single word identifying the moment to act: “EASE!” In
order for a command to be executed, the commander will need to change the command before it can be executed. Can we be using the expression “as you were” to interrupt the preparatory statement before the execution.
What are some good signs for a commandant to call out the introductory part, alerting the soldiers that something is about to happen, e.g., F-14 bombing close to the time). Come to attention after standing easy to watch a presentation.
If you were writing a realistic manual for drill commanders, you would want to include these cases. When introducing a command, you would probably have the
-
words to the effect that: You can use the introductory part of the command to alert your soldiers that a command
-
will be coming soon, and You are strongly advised not to follow
-
the introductory command with garbled and confusing expressions. It gets people really annoyed sometimes.
These will not sound exactly right to people who have done military drill (and I’m not talking about drill team choreography here), but that’s because people in real life are somewhat more complex than compilers and preprocessors, and their actual use of language is harder to describe.
On the basis of this notion, all statements must follow the same expression to get the best attention or invoke the preprocessor. However, the basic idea is that an expression to get attention does not need to be followed by an expression requiring an action but should not be misinterpreted. Silence is the best bet.
