• Middle meaning the half-position between two horizontal lines while using x number for gradation. Y is the direction in which all gradations end. Y is the direction of x number.
• Where can a center be located by the half-position between two vertical lines, pillars, or a position in the X-axis or a vertical line on Earth?

In other words, middle gets typically used when there is a sense of progression between two points (either concrete or abstract). On the other hand, center gets used when the two extreme points are equally important or otherwise one no better than the other.

Why do there are middle aligned text and center aligned images?

Is there middle class, to distinguish from lower and upper classes? Similarly with the term mid-career because seniority is viewed as going upwards. All things are viewed as ladders. These things are any things that go upwards. There is no center class nor center career. I am in the middle of baking a cake. I am in the middle. I am a bit nervous. Likewise

there is the center of a stage and the center of attention. There isn’t any middle stage nor middle attention, because those aren’t thought of having “levels” but instead go along the horizontal axis.

Humans view things mostly two dimensionally, since both of our eyes faces the same direction and we don’t have penetrative vision (e.g. sonar) (Nasos I: 2: 2: S) and that is to say that the humans are inclined to be in one direction, even if they are, we all see the same thing). Imagine that you’re looking at a wall, what you’re seeing is mostly two dimensions – there is the width of the wall which goes from left to right and the height of the wall which goes from bottom to top. Does X-ray have the depth to be seen?

Is it wrong to think in two dimensions? In career movement there are 2 types of movement: lateral movement, lateral movement, horizontal movement, overall strategy. You move to lateral movement in which you change roles with similar salary, and increases productivity. Depending on what you are able to do as a career mover – see below.

Reference:

• HTML Image Alignment
• HTML Paragraph Alignment

HTML Document Alignement.

• Middle meaning the half-position between two horizontal lines while using x number for gradation. Y is the direction in which all gradations end. Y is the direction of x number.
• Where can a center be located by the half-position between two vertical lines, pillars, or a position in the X-axis or a vertical line on Earth?

In other words, middle gets typically used when there is a sense of progression between two points (either concrete or abstract). On the other hand, center gets used when the two extreme points are equally important or otherwise one no better than the other.

Why do there are middle aligned text and center aligned images?

Is there middle class, to distinguish from lower and upper classes? Similarly with the term mid-career because seniority is viewed as going upwards. All things are viewed as ladders. These things are any things that go upwards. There is no center class nor center career. I am in the middle of baking a cake. I am in the middle. I am a bit nervous. Likewise

there is the center of a stage and the center of attention. There isn’t any middle stage nor middle attention, because those aren’t thought of having “levels” but instead go along the horizontal axis.

Humans view things mostly two dimensionally, since both of our eyes faces the same direction and we don’t have penetrative vision (e.g. sonar) (Nasos I: 2: 2: S) and that is to say that the humans are inclined to be in one direction, even if they are, we all see the same thing). Imagine that you’re looking at a wall, what you’re seeing is mostly two dimensions – there is the width of the wall which goes from left to right and the height of the wall which goes from bottom to top. Does X-ray have the depth to be seen?

Is it wrong to think in two dimensions? In career movement there are 2 types of movement: lateral movement, lateral movement, horizontal movement, overall strategy. You move to lateral movement in which you change roles with similar salary, and increases productivity. Depending on what you are able to do as a career mover – see below.

Reference:

• HTML Image Alignment
• HTML Paragraph Alignment

HTML Document Alignement.

• Middle meaning the half-position between two horizontal lines while using x number for gradation. Y is the direction in which all gradations end. Y is the direction of x number.
• Where can a center be located by the half-position between two vertical lines, pillars, or a position in the X-axis or a vertical line on Earth?

In other words, middle gets typically used when there is a sense of progression between two points (either concrete or abstract). On the other hand, center gets used when the two extreme points are equally important or otherwise one no better than the other.

Why do there are middle aligned text and center aligned images?

Is there middle class, to distinguish from lower and upper classes? Similarly with the term mid-career because seniority is viewed as going upwards. All things are viewed as ladders. These things are any things that go upwards. There is no center class nor center career. I am in the middle of baking a cake. I am in the middle. I am a bit nervous. Likewise

there is the center of a stage and the center of attention. There isn’t any middle stage nor middle attention, because those aren’t thought of having “levels” but instead go along the horizontal axis.

Humans view things mostly two dimensionally, since both of our eyes faces the same direction and we don’t have penetrative vision (e.g. sonar) (Nasos I: 2: 2: S) and that is to say that the humans are inclined to be in one direction, even if they are, we all see the same thing). Imagine that you’re looking at a wall, what you’re seeing is mostly two dimensions – there is the width of the wall which goes from left to right and the height of the wall which goes from bottom to top. Does X-ray have the depth to be seen?

Is it wrong to think in two dimensions? In career movement there are 2 types of movement: lateral movement, lateral movement, horizontal movement, overall strategy. You move to lateral movement in which you change roles with similar salary, and increases productivity. Depending on what you are able to do as a career mover – see below.

Reference:

• HTML Image Alignment
• HTML Paragraph Alignment

HTML Document Alignement.

• Middle meaning the half-position between two horizontal lines while using x number for gradation. Y is the direction in which all gradations end. Y is the direction of x number.
• Where can a center be located by the half-position between two vertical lines, pillars, or a position in the X-axis or a vertical line on Earth?

In other words, middle gets typically used when there is a sense of progression between two points (either concrete or abstract). On the other hand, center gets used when the two extreme points are equally important or otherwise one no better than the other.

Why do there are middle aligned text and center aligned images?

Is there middle class, to distinguish from lower and upper classes? Similarly with the term mid-career because seniority is viewed as going upwards. All things are viewed as ladders. These things are any things that go upwards. There is no center class nor center career. I am in the middle of baking a cake. I am in the middle. I am a bit nervous. Likewise

there is the center of a stage and the center of attention. There isn’t any middle stage nor middle attention, because those aren’t thought of having “levels” but instead go along the horizontal axis.

Humans view things mostly two dimensionally, since both of our eyes faces the same direction and we don’t have penetrative vision (e.g. sonar) (Nasos I: 2: 2: S) and that is to say that the humans are inclined to be in one direction, even if they are, we all see the same thing). Imagine that you’re looking at a wall, what you’re seeing is mostly two dimensions – there is the width of the wall which goes from left to right and the height of the wall which goes from bottom to top. Does X-ray have the depth to be seen?

Is it wrong to think in two dimensions? In career movement there are 2 types of movement: lateral movement, lateral movement, horizontal movement, overall strategy. You move to lateral movement in which you change roles with similar salary, and increases productivity. Depending on what you are able to do as a career mover – see below.

Reference:

• HTML Image Alignment
• HTML Paragraph Alignment

HTML Document Alignement.

• Middle meaning the half-position between two horizontal lines while using x number for gradation. Y is the direction in which all gradations end. Y is the direction of x number.
• Where can a center be located by the half-position between two vertical lines, pillars, or a position in the X-axis or a vertical line on Earth?

In other words, middle gets typically used when there is a sense of progression between two points (either concrete or abstract). On the other hand, center gets used when the two extreme points are equally important or otherwise one no better than the other.

Why do there are middle aligned text and center aligned images?

Is there middle class, to distinguish from lower and upper classes? Similarly with the term mid-career because seniority is viewed as going upwards. All things are viewed as ladders. These things are any things that go upwards. There is no center class nor center career. I am in the middle of baking a cake. I am in the middle. I am a bit nervous. Likewise

there is the center of a stage and the center of attention. There isn’t any middle stage nor middle attention, because those aren’t thought of having “levels” but instead go along the horizontal axis.

Humans view things mostly two dimensionally, since both of our eyes faces the same direction and we don’t have penetrative vision (e.g. sonar) (Nasos I: 2: 2: S) and that is to say that the humans are inclined to be in one direction, even if they are, we all see the same thing). Imagine that you’re looking at a wall, what you’re seeing is mostly two dimensions – there is the width of the wall which goes from left to right and the height of the wall which goes from bottom to top. Does X-ray have the depth to be seen?

Is it wrong to think in two dimensions? In career movement there are 2 types of movement: lateral movement, lateral movement, horizontal movement, overall strategy. You move to lateral movement in which you change roles with similar salary, and increases productivity. Depending on what you are able to do as a career mover – see below.

Reference:

• HTML Image Alignment
• HTML Paragraph Alignment

HTML Document Alignement.